Complete Comfort II Mat

Product Number 594

Complete Comfort II mats are anti-microbial anti-fatigue mats that can be autoclave sterilized and commercially laundered.


  • Complete Comfort II mats are constructed with 1/2" thick nitrile rubber foam to provide superior anti-fatigue properties and are anti-microbially treated to provide lifetime protection from odors and degradation.
  • Complete Comfort II mats are grease and oil proof, chemical resistant, and welding safe.
  • The edges are beveled to provide to help provide a safe transition from the floor to the mat.

Recommended for use in wet or dry commercial and industrial settings, the Complete Comfort II is particularly popular in healthcare facilities since it is anti-microbial treated and can be autoclave sterilized.

2' x 3' (24" x 36")
3' x 4' (35" x 48")
3' x 5' (35" x 60")
4' x 6' (44" x 69")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

CONSTRUCTION
Material: High-density, closed-cell nitrile foam
Thickness: 1/2 inch (0.5")

STANDARDS & TESTING

  • Passes flammability standard DOC-FF1-70
  • Compression Deflection:
          50.5% at 20 psi
          63.1% at 40 psi
  • ASTM C1028-96 static coefficient of friction:
         Dry 0.96
         Wet 0.82
  • Passes fungal resistance standard ASTM G21
  • ESD rating: static dissipative

Complete Comfort II mats can be cleaned in several different ways:

  • Commercially laundered (see Laundering Instructions)
  • Sterilized in an autoclave
  • Washed by hand using the following instructions:  Scrub with a deck brush (as needed), using a detergent with a neutral pH; rinse with a hose or pressure washer
  • Hang to dry

Always make sure the mat is dry before placing it back in service.

Complete Comfort II mats can be commercially laundered to remove oil, grease, and soil.  The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.  Complete Comfort mats do not require extracting or drying. 

  1. Flush 2-3 minutes, high water level, cold water
  2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
  3. Rinse 2 minutes, high water level, cold water
  4. Rinse 2 minutes, high water level, cold water
  5. Drain 2 minutes
  6. Lay mats flat following removal from washer.  Allow to cool before rolling.